Hi All.

I am running a Raspi Network Proview V5.5.

The Development station(Raspi3) and Process Station(RasPi Zero W) seems to function correctly.

The Operator station (RasPi2) does not display any dynamic values.

I do not know what i am doing wrong.

Please can someone please advise.

I am trying to add and attachment (screen shot) doesn't seem to work.

Okay i can't get the attachment to upload.

The Graph is simple a RoundInd and 2 buttons.

The RoundInd is driven by a 2 second pulse from the process station. On the operator station i can see the actualValue changing in the Xtt navigator. The Graph is just Gray no changes.

If i press a button i get the message "SetDig error: Proc_Node-Input2.ActualValue##Boolean"

Hi ProviewFan,

One possible error is that the object has another name in the operator station. You should name the Mount object so the object names are equal in operator and process stations.

/Claes

Hi Claes

Thank you for your advise.

I have checked the MountObject made sure that was correct.

What I found was the relation between the hosts name and the volume names which need to be accurate.

In my setup there was some ambiguity in the /etc/hosts..... uhhh mmm I am also new at this...

I optimized/rectified the /etc/hosts vs uname, rebuild the volumes and redistribute.

That cleared the problem and it is working fine.

So next step would be to try Arduino connected to PI Zero W.
I know the UNO works with the Pi 1 v5.1. I was thinking to try NANO with this configuration

Once again thank you for your assistance.