Dear Claes,

We have difficulties to Initialization of the Arduino board with \"/dev/ttyACM0 on linux\" . The installation is successful and the board is working properly but to open the sketch and use \"$pwr_inc/pwr_arduino_uno.pde \" is not successful.

We cannot reach the step upload of \"pwr_arduino_uno\" and \"USB port baud rate\". Please give us instruction step by step for \"Arduino Uno configuration\" . With installations from Arduino.cc, the \"tty\" is different.

Thanks for your support!

Paul

PS: Thank you Mark for your video, impatient to wait for your Arduino video. Paul

Hi Paul,

To upload the Proview sketch to the ardino board you activate File/Open in the Arduino development environment and go to the folder /usr/pwr48/os_linux/hw_x86/exp/inc where you should find pwr_arduino_uno.pde. Change the baud rate in the code as described in Guide to I/O Systems. Select the board type in Tools/Board in the menu, and select the port in Tools/Serial Port, usually /dev/ttyACM0. Compile the sketch and upload to the board.

/Claes

Hi Paul,

Link removed. Too many trafic....

/Marc

Post edited by: marc, at: 2011/03/24 08:47

Thanks Marc, I get-it.

Great.