Welcome, Guest
Username: Password: Remember me

TOPIC: Start runtime error / boot file missing

Re: Start runtime error / boot file missing 12 years 1 month ago #3219

  • claes
  • claes's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 3170
  • Thank you received: 497
  • Karma: 133
What is the content of the ld_node... file? It seems as the same name, ip address or volume id is used for both nodes.

/Claes
The administrator has disabled public write access.

Re: Start runtime error / boot file missing 12 years 1 month ago #3220

  • vib150
  • vib150's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 19
  • Karma: 0
Hi again.

Thanks a million Claes. I have finaly running the three process in the server. I going to check everything again and try to make it work. Again, thank you.
The administrator has disabled public write access.

Re: Start runtime error / boot file missing 12 years 1 month ago #3222

  • vib150
  • vib150's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 19
  • Karma: 0
Hi Claes.

when I start the runtime monitor, the SevHistThread status remains showing: "%SEV-E-UNKNOWNNODE, unknown server node name"

In the system messages pwr_sevHistmon is in red and says: "Unknown nodename 'and the SevHistThread path in the hierarchy'"
The administrator has disabled public write access.

Re: Start runtime error / boot file missing 12 years 1 month ago #3223

  • claes
  • claes's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 3170
  • Thank you received: 497
  • Karma: 133
Check the spelling of the server name in the SevHistThread object. And that there or no leading or tailing spaces. Compare with the name in the ld_node... file.

Have you checked with rt_rtt that the qcom link is up ?

/Claes
The administrator has disabled public write access.

Re: Start runtime error / boot file missing 12 years 1 month ago #3224

  • vib150
  • vib150's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 19
  • Karma: 0
The rt_rtt only shows a local link.

The ld_node file is:

horatio 0.1.1.9 192.168.2.55 0 1
sr100scada 0.1.1.7 192.168.2.45 0 1

so, I have to state "horatio" as server node?
The administrator has disabled public write access.

Re: Start runtime error / boot file missing 12 years 1 month ago #3225

  • claes
  • claes's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 3170
  • Thank you received: 497
  • Karma: 133
I suspect that you are still running the simulation bus on the development station which is 999. Change the bus id in /etc/proview.cnf to 1.

/Claes
The administrator has disabled public write access.
Time to create page: 8.171 seconds