Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
  • Page:
  • 1
  • 2

TOPIC: Proview not starting on ARM issue

Proview not starting on ARM issue 12 years 1 month ago #3319

  • Snarf77
  • Snarf77's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 847
  • Thank you received: 2
  • Karma: 5
Hi all,

I just finished creating a new rootfs for ARM and tried to launch Proview on it.

As shown in the log result below everything seems nearly normal but no process is "starting" correctly.

The log issue shouldn't be a problem and the double definition I will have a look at but didn't expect such an error producing a "not starting" consequence (right ??).

My last guess was that the Proview ARM tree was not built with the same cross tool chain as the the rest (kernel, and rootfs binaries). (but still using glibc). Do you thinkk this could be a clue ?


Does someone has a hint ?

Thanks in advance

Snarf

   Proview/R Version V4.8.2 for Linux on Unknown Hardware
   Copyright � 31-MAY-2011 20:00:00 by SSAB Oxel�sund AB

   Proview/R is free software; you can redistribute it and/or
   modify it under the terms of the GNU General Public License.

   This program is distributed in the hope that it will be useful
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
   GNU General Public License for more details.

   PROVIEW/R Process Environment

I Reading Boot file /pwrp/common/load/ld_boot_debarm_0001.dat
I Created at 10-FEB-2012 18:09:21.43 for project: arm
I This node vill run PLC file: plc_debarm_0001_00025
I This node has node identity 0.1.1.1 (65793)
I Reading Node file /pwrp/common/load/ld_node_debarm_0001.dat
I Reading volume file /pwrp/common/load/volarm.dbs
I Created 10-FEB-2012 17:09:20.00
I Reading volume file /usr/pwrrt/load/rt.dbs
I Created 14-JUN-2011 10:00:00.00
I Reading volume file /usr/pwrrt/load/pwrs.dbs
I Created 14-JUN-2011 10:00:00.00
I Reading volume file /usr/pwrrt/load/pwrb.dbs
I Created 14-JUN-2011 10:00:00.00
I Reading volume file /usr/pwrrt/load/basecomponent.dbs
I Created 14-JUN-2011 10:00:00.00
I Reading volume file /usr/pwrrt/load/profibus.dbs
I Created 14-JUN-2011 10:00:00.00
I Reading volume file /usr/pwrrt/load/otherio.dbs
I Created 14-JUN-2011 10:00:00.00
I Mapped /tmp/pwr_db_lock_1, base: 40020000, size: 12
I Objects      : 39927 : 11818392 bytes
I Volumes      : 30 : 13680 bytes
I Classes      : 300 : 33600 bytes
I Nodes        : 10 : 6240 bytes
I Mount servers: 100 : 7600 bytes
I Alias servers: 50 : 2400 bytes
I Sub servers  : 500 : 54000 bytes
I Sub clients  : 2000 : 352000 bytes
I San servers  : 200 : 16800 bytes
I Cache   : 10000
I Cached classes: 300 : 208800 bytes
I Cached class volumes: 150 : 8400 bytes
I Sub class objects: 300 : 37200 bytes
I Pool isize   : 12559112, esize: 1569889
I Rtdb isize   : 3816720, esize: 477090
I Mapped /tmp/pwr_pool_1, base: 40a6d000, size: 18516
I Mapped /tmp/pwr_po0001_1, base: 40a72000, size: 12559112
I Mapped /tmp/pwr_rtdb_1, base: 4166d000, size: 18516
I Mapped /tmp/pwr_rt0001_1, base: 41672000, size: 3816720
I Mapped /tmp/pwr_po0002_1, base: 40021000, size: 2016
I Reading volume file /pwrp/common/load/volarm.dbs
I Loading volume VolArm ()...
I Reading volume file /usr/pwrrt/load/rt.dbs
I Loading volume rt ()...
I Reading volume file /usr/pwrrt/load/pwrs.dbs
I Loading volume pwrs ()...
I Reading volume file /usr/pwrrt/load/pwrb.dbs
I Loading volume pwrb ()...
I Reading volume file /usr/pwrrt/load/basecomponent.dbs
I Loading volume BaseComponent ()...
I Reading volume file /usr/pwrrt/load/profibus.dbs
I Loading volume Profibus ()...
I Reading volume file /usr/pwrrt/load/otherio.dbs
I Loading volume OtherIO ()...
I Created pwrNode, oid: _O1.1.1.1:2147483649
E Cannot open log file: $pwrp_log/pwr_debarm.log
I Setting log file to: $pwrp_log/pwr_debarm.log
I Mapped /tmp/pwr_qdb_lock_1, base: 40022000, size: 12
I Qcom pool isize : 600000, esize: 300000
I Mapped /tmp/pwr_qpool_1, base: 41a16000, size: 18516
I Mapped /tmp/pwr_qp0001_1, base: 41a1b000, size: 600000
I Mapped /tmp/pwr_qp0002_1, base: 41aae000, size: 560
E IO init: Double signal connection 'Plant_ARM-EXT-TrippedWord' and 'Plant_ARM-EXT-WarningWord'
I BACKUP loading information from $pwrp_load/pwr_backup.bck
I pwr_neth, file: rt_neth, prio: 18, will not be started.
I pwr_qmon, file: rt_qmon, prio: 19, will not be started.
I pwr_nacp, file: rt_neth_acp, prio: 17, will not be started.
I pwr_io, file: rt_io_comm, prio: 17, will not be started.
I pwr_tmon, file: rt_tmon, prio: 17, will not be started.
I pwr_emon, file: rt_emon, prio: 17, will not be started.
I pwr_alim, file: rt_alimserver, prio: 17, will not be started.
I pwr_bck, file: rt_bck, prio: 16, will not be started.
I pwr_linksup, file: rt_linksup, prio: 16, will not be started.
I pwr_trend, file: rt_trend, prio: 15, will not be started.
I pwr_fast, file: rt_fast, prio: 15, will not be started.
I pwr_remh, file: rs_remotehandler, prio: 5, will not be started.
I pwr_remlog, file: rs_remote_logg, prio: 5, will not be started.
I pwr_elog, file: rt_elog, prio: 15, will not be started.
I pwr_sysmon, file: rt_sysmon, prio: 16, will not be started.
I pwr_webmon, file: rt_webmon.sh, prio: 15, will not be started.
I pwr_webmonmh, file: rt_webmonmh.sh, prio: 15, will not be started.
I pwr_webmonelog, file: rt_webmonelog.sh, prio: 15, will not be started.
I pwr_opc_server, file: opc_server, prio: 15, will not be started.
I pwr_statussrv, file: rt_statussrv, prio: 15, will not be started.
I pwr_sevhistmon, file: rt_sevhistmon, prio: 15, will not be started.
I pwr_sev_server, file: sev_server, prio: 15, will not be started.
I Adding application. aix: 1
I pwr_plc, file: plc_debarm_0001_00025, prio: 5, will not be started.
The administrator has disabled public write access.

Re: Proview not starting on ARM issue 12 years 1 month ago #3320

  • claes
  • claes's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 3178
  • Thank you received: 502
  • Karma: 133
Hi Snarf,

The rt_ini process seems to work fine, so I don't think there is a problem with the tool chain.

You will get the "will not be started" message if

- the executable is not present on $pwr_exe or $pwrp_exe.
- norun is set in the ld_appl file for the process.

My guess is that $pwr_exe and $pwrp_exe are not defined correctly.

/Claes
The administrator has disabled public write access.

Re: Proview not starting on ARM issue 12 years 1 month ago #3323

  • Snarf77
  • Snarf77's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 847
  • Thank you received: 2
  • Karma: 5
Thank you Claes,

It's better now ($pwr_exe and pwrp_exe was not defined) in new installation and I only copied the proveiw directory. Is there a list of the required envornment variable so I can add them manually.


I just have the libstdc++ lib missing and it should be correct.

I also have a last problem with pwr_pkg.sh which can't be launched from the development console although the file is present in /usr/pwrrt/exe and is exec. /usr/pwrrt/exe is in the PATH envrionment.

What could be missing ?
root@debarm's password:
pwrp_pkk_debarm_0034.tgz                 100% 2312KB 578.0KB/s    00:04
root@debarm's password:
sh: /pwr_pkg.sh: not found

Thanks
The administrator has disabled public write access.

Re: Proview not starting on ARM issue 12 years 1 month ago #3324

  • claes
  • claes's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 3178
  • Thank you received: 502
  • Karma: 133
Normally $pwr_exe and $pwrp_exe are setup by /etc/pwrp_profile so I suggest you copy this file and execute it in /root/.bashrc with

source /etc/pwrp_profile

This will also fix the second problem where $pwr_exe is not defined when logging in as root.

/Claes
The administrator has disabled public write access.

Re: Proview not starting on ARM issue 12 years 1 month ago #3325

  • Snarf77
  • Snarf77's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 847
  • Thank you received: 2
  • Karma: 5
Hi Claes,

I copy the pwrp_profile and now quite everything is working quite well.

I spent some time to manage busybox to use bash but now it's ok with the relevant option.

Indeed, I have one minor remaining issue which is:

- the distribute fucntion in development station doesnt work for my ARM target and I don't know why. It failed when trying to launch pwr_pkg.sh (sh : pwr_pkg.sh not found) whereas the download has been ok and if I launch direclty on the target the command pwr_pkg.sh -i pacakge_name it works...).
There is also a link to /pwrp/x86_linux somewhere I had to symlink to /pwrp/arm_linux to make pwr_pkg.sh being able to finish correctly its move/renmame process. I will have a look if this can be due a bad environment vairable from my system or if this is hardly written somewhere. This last issue is not really annoying compared to the fact that the automatic unpacking fails.

Do you have any idea of what could prevent the distribute function to behave normally ?

Thank you in advance

Snarf
The administrator has disabled public write access.

Re: Proview not starting on ARM issue 12 years 1 month ago #3327

  • claes
  • claes's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 3178
  • Thank you received: 502
  • Karma: 133
Hi Snarf,

In /etc/pwrp_profile $pwrp_... are pointing at /pwrp/x86_linux and should be changed to /pwrp/arm_linux.

The distribution problem is that $pwr_exe is not defined. The shell is trying to execute $pwr_exe/pwr_pkg.sh, and as $pwr_exe is empty the error message is 'sh: /pwr_pkg.sh not found'. The only thing I have done to make it work is to add these lines in /root/.bashrc
if [ -e /etc/pwrp_profile ]; then
  source /etc/pwrp_profile
fi

/Claes
Last Edit: 12 years 1 month ago by claes.
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 8.430 seconds